Tel: +86-769-81708449
Home > News > Content
Categories

Jolly Sunshine Limited

Address:Pennisula Commercial Center, Shilong Town,Dongguan City,Guangdong Province,China

Contact:Irene

TEL:(+86)769-81708449

phone:(+86)13418290586

E-mail:sales02@jollysunshine.com

Web:www.jollysunshine.com


How Much Do You Know About Poly Bag?

Jolly Sunshine Limited | Updated: Nov 25, 2016

Introduction

Plastic bags also called "poly bags" are shaped like two identically-sized rectangular plastic sheets (usually less than 250 micron thickness) fused together on three of the sides, with one side left for the opening.


How it is made?

Most Plastic bags are made from polyethylene - more commonly known as polythene, which is made from crude oil and natural gas, non-renewable resources.

The most common way to produce polythene bags is by blown film extrusion, also called the "tubular film process."

In Blown film production process - polythene melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. into the tube causing it to expand and form a bubble. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a 'lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage.

·         Single wound sheeting - Lay flat polythene tubing slit on both sides, creating 2 sheets on top of each other and wound separately called SWS(single wound sheeting)

·         Centrefold sheeting - Lay flat tubing slit on one side before winding so that a long sheet is formed, that opens out to twice the film width

·         Lay flat tubing - Polythene bubble collapsed and wound up forming a tube. Can be Gusseted at sides (so the bubble opens out to a larger width). Ideal for packaging long 'difficult to wrap' items. Insert into tubing and cut to required length then heat seal both ends to create made-to-measure bags.

·         Double wound sheeting - Lay flat polythene tubing slit on both sides, creating 2 sheets on top of each other but wound together known as DWS (double wound sheeting)

·         J-fold - A strip of material is removed from the polythene film before winding.

·         Centre slit tubing - A polythene film slited from the centre and wounded on two different cores.

·         Bags on roll - Bags attached by perforation and rolled up on a core

·         Polythene or Poly bags individually cut

·         Carrier bags with Cut handle, Loop handle, Clip Close or Vest style

We jolly sunshine has 10 sets of blowing machine to produce PP,PO,PE, bio-degradable rolls that can control the poly bags’ cost and quality from the well beginning. To protect the environment, more and more consumers will choose to use bio-degradable bag. To satisfy the upcoming needs, we supply bio-degradable bag in different degradation period. They are 100% corn starch material which can be fully degraded within 3-6 months, F1material and BPA material which can be degraded within 12 months, starch-based material which can be degraded within 24-36 months. Email us and quotation will be sent soon.